B200 - Hazmat [Drum] Storage Locker

 

Sump Capacity to Hold 2/55 Gal. Drum

     
  Dim: 6'11"H x 5'W x 3'6"D
Approx. 1281 Lbs. Ship Weight

Door Style: 1-42" W x 62.5" H door installed with a UL Classified commercial grade keyed lockset. The door shall serve as personnel entrance and exit.
     
 

Approvals

 
  Complies with EPA & current OSHA regulations
  FM-Factory Mutual Approved
  NFPA - Designed in accordance with specifications set forth by the National Fire Protection Association
  UL - Include UL listed electrical accessories
     


Specifically designed for outdoor hazardous material storage and dispensing from 55-gallon drums containing flammable or combustible liquids. Outer wall is constructed of all-welded 16 or 12 gauge steel. Inner wall is constructed of 20 gauge steel. The double wall construction contains 3" of air space throughout. All Hazmat Storage Buildings are designed in accordance with the standards set forth by NFPA Code 30 and comply with OSHA and EPA regulations. All models are FM Approved for the storing and dispensing of flammable and combustible liquids. All electrical installations are U.L. Approved & Compliant to 1999 & 2002 NEC.


Fire Rating & Explosion Relief Panel

OPFR2-200 2 Hour Fire Rating Upgrade; Approx. Ship. Wt. 1,298 Lbs.

Industry's 1st & Only Intertek Tested and FM Approved 2 hrs fire rated wall construction built with 1.5 hour fire rated roof construction, 1.5 hour fire rated door construction, and multiple layers of ¾” gypsum ultracode wallboard. Air inlet vents with UL Listed and labeled fire damper with louvers. Dampers have a galvanized steel frame, curtain-type galvanized steel blades and a UL Listed 165° F fusible link.

  

OPFR4-200 4 Hour Fire Rating Upgrade; Approx. Ship. Wt. 1,722 Lbs.

Industry's 1st & Only Intertek Tested and FM Approved 4 hrs fire rated wall construction built with 3 hour fire rated roof construction, 3 hour fire rated door construction, and multiple layers of ¾” gypsum ultracode wallboard. Air inlet vents with UL Listed and labeled fire damper with louvers. Dampers have a galvanized steel frame, curtain-type galvanized steel blades and a UL Listed 165° F fusible link.

  

OPXRP-200 Explosion Relief Panel; 1-48" X 60"

Used in the construction of buildings designed to store Class IA and Class IB flammables. Explosion relief panels limit the damage within an enclosed hazardous location. When the panel(s) are subjected to an explosive force, the pressure relieving panel quickly vents the force before it causes major damage. The panels are designed to release at 20 psf.

  

Lighting & Electrical



OP0001 - Explosion Proof Interior Light with Switch
OP0001A - Additional Explosion Proof Interior Light
OP0001-LED - Explosion Proof LED Interior Light with Switch
OP0002 - Explosion Proof Exterior Light with Photo Cell

OP0005 - Explosion Proof Receptacle





HVAC (Insulation OP0009 Recomended)



OP0006-6 - Explosion Proof Heater [6,143 BTU]
OP0006-12 - Explosion Proof Heater [12,286 BTU]
OP0006-24 - Explosion Proof Heater [24,000 BTU]
OP0007-14 - Explosion Proof A/C [14,000 BTU]
OP0007-19 - Explosion Proof A/C [19,000 BTU]
OP0013 - Explosion Proof Exhaust System
IF Needed, Exhaust will run 24/7 (please Check if selecting OP0013)

Safety & Protection

OP0010 - Dry Chemical Fire Suppression System
  
OP0010A - Dry Chemical Alarm
  
OP0011 - Water Sprinkler System with 1" NPT Feed
  
OP0012 - Water Sprinkler System with Fire Hose Adapter
  
OP0014 - Liquid Level Detector with Alarm
  
OP0015 - HDPE Sump Liner -- .04" Thick (Plastic Welded)
  
OP0023 - Grounding Kit (8 Ft. Rod, 10 Ft. Cable with Clamps)
OP0025-6 - 6 Gallon Gravity Fed Eyewash Station
  
OP0025-16 - 16 Gallon Gravity Fed Eyewash Station
  
OP0028 - Portable Fire Extinguisher -- 10 Lbs. Capacity

Doors & Flooring

OP0021-36 - Additional 80"H x 36"W Door
  
OP0021-42 - Additional 80"H x 42"W Door
  
OP0021-60 - Additional 80"H x 60"W Double Door
  
OP0024-F - Fiberglass Floor Grating
  
OP0024-GS - Galvanized Steel Floor Grating
  

Ramps

BR60 - Ramp 24" x 72"
BR60A - Aluminum Ramp 24" x 72"
BR70 - Diamond Plated Ramp 44" x 88"
BR80 - Diamond Plated Ramp 52" x 72"

Miscellaneous

OP0009 - R-11 Insulation (Standard in AG Models)
OP0022 - Shelving, 14"W with 2" Raised Edges (Standard in AG Models)